Přímé hrdlo NPT

Řada	Ø trubky d1	Tlak [bar]	Závit d2	dx	SW1	lg	i	Specifikace
L	10	PN 315	1/4" NPT	7.00	17	31.10	15.1	GE10L 1/4" NPT OMD
S	10	PN 630	3/8" NPT	7.00	19	35.20	15.2	GE10S 3/8" NPT OMD
L	12	PN 315	3/8" NPT	9.00	19	32.20	15.2	GE12L 3/8" NPT OMD
L	12	PN 315	1/2" NPT	10.00	24	36.80	19.8	GE12L 1/2" NPT OMD
L	12	PN 315	1/4" NPT	7.00	19	32.00	15.1	GE12L 1/4" NPT OMD
S	12	PN 630	3/8" NPT	8.00	22	37.20	15.2	GE12S 3/8" NPT OMD
S	12	PN 630	1/4" NPT	5.00	22	37.10	15.1	GE12S 1/4" NPT OMD
L	15	PN 315	1/2" NPT	11.00	24	37.80	19.8	GE15L 1/2" NPT OMD
L	15	PN 315	3/8" NPT	9.00	24	33.20	15.2	GE15L 3/8" NPT OMD
S	16	PN 400	1/2" NPT	12.00	27	43.80	19.8	GE16S 1/2" NPT OMD
L	18	PN 315	3/8" NPT	9.00	27	34.20	15.2	GE18L 3/8" NPT OMD
S	20	PN 400	3/4" NPT	16.00	32	48.10	20.1	GE20S 3/4" NPT OMD
L	22	PN 160	3/4" NPT	18.00	32	41.10	20.1	GE22L 3/4" NPT OMD
S	25	PN 400	1" NPT	20.00	41	57.00	25.0	GE25S 1" NPT OMD
L	28	PN 160	1" NPT	23.00	41	47.00	25.0	GE28L 1" NPT OMD
S	6	PN 630	1/4" NPT	4.00	17	33.10	15.1	GE06S 1/4" NPT OMD
L	8	PN 315	1/4" NPT	6.00	17	30.10	15.1	GE08L 1/4" NPT OMD
S	8	PN 630	1/4" NPT	5.00	17	35.10	15.1	GE08S 1/4" NPT OMD
L	8	PN 315	3/8" NPT	6.00	19	31.20	15.2	GE08L 3/8" NPT OMD

ocel DIN 3859-1
povrchová úprava	zinek-nikl